小方法不需要工具即可知道囉^^
1.開始磁碟重組工具
2.設定排程
3.選擇磁碟
若此時可以選則 C: 則表示 WIN 7沒有認出 SSD
若 WIN 7 有正確辦識出 SSD 那麼將無法選擇 C:
=========以下轉貼========================
這是Microsoft自家人所提出的辨識方式：
http://social.technet.microsoft. ... 9-b600-502b0fbd32fc
=======================================================================
As I know, currently there are many drives that don't properly report that they are SSDs when queried, so Windows is not able to properly apply the SSD
optimizations to those drives. You can check to see if an SSD has been properly detected by looking in Disk Defragmenter. To do this, please refer to
the following steps:
1)Open Disk Defragmenter ==> 啟動磁碟重組工具
2)Click the Configure schedule button ==>按下"設定排程"按鈕
3)Click the Select disks button==>按下"選取磁碟"按鈕
If the disk is missing from the list, then it has been detected as an SSD and will not be automatically defragmented.==>如果特定SSD硬碟並未在清單中出現
，則該SSD已被正確識別為SSD，不會被自動重組。
If the disk is an SSD, but has not been detected as such, then it's important to remove the check next to the disk in this list so that Windows does not
attempt to defragment the drive, which will reduce the life of the drive. ==>如果該SSD出現在清單中，表示Win7無法正確識別，則應手動在清單中取消勾選該SSD
，以免縮短其壽命。
