開啟瀏覽器~
網址打"http://192.168.1.1"
他會叫你打帳號密碼
帳號cht 密碼chtnvdsl 北部
帳號cht 密碼chtcvdsl 中部
帳號cht 密碼chtsvdsl 南部
進去之後
上面有一些基本資訊
我們先設定硬撥
去左邊找 Advanced Setup > WAN 按下去
然後按Add
出現
WAN Service Interface Configuration
Select a layer 2 interface for this service:
選第一個(應該是ptm0/開頭的..像上面那個)
按Next...
選這個
PP over Ethernet (PPPoE)
下面的Enter Service Description可以隨便改(或是預設就好)
再按Next
會出現
PPP Username: (打Hinet連線帳號)
PPP Password: (打Hinet連線密碼)
PPPoE Service Name: (隨便打幾個字)
再按Next..出現
Select a preferred wan interface as the system default gateway.
Selected WAN Interface
選"不是"NMS開頭的
再按Next...
直接再按一次Next>然後按儲存
再回到 Advanced Setup > WAN
找這行
ptm0_1 NMS IPoE N/A N/A 1 Disabled Enabled Enabled
按右邊的Edit
直接按Next
選這兩個
Enable NAT
Enable Firewall
再按Next
接下來
Routing -- Default Gateway
Select a preferred wan interface as the system default gateway.
Selected WAN Interface
選不是NMS的那個
點Next
也是選不是NMS的那一個>再Next>儲存
這樣硬撥就好了
接下來是把DHCP開啟
到左邊選Advanced Setup >LAN
下面選
Enable DHCP Server
然後會有三行(預設好像已經打上去了..可以不用改)
Start IP Address:起始的IP位置
End IP Address:結束的IP位置
Leased Time (hour):有效時間
好了之後到下面按Apply/Save就大功告成了